Product Information


Building upon the restoration promise of FieldShield Pushable Fiber, FieldShield D-ROP is a pre-connectorized drop cable delivered to market pre-placed in a 7mm microduct. Installed by the contractor as a single-pass deployment, FieldShield D-ROP also provides ease of restoration. In the event of a future fiber cut, a field technician easily identifies the cut area, and utilizes a simple coupler and a FieldShield Pushable Fiber Assembly to restore service.

FieldShield D-ROP

FieldShield D-ROP


FieldShield D-ROP cable presents the same footprint as a flat drop cable with the added advantage of being restorable. Just like traditional FieldShield Microduct and fiber, fiber cuts are located, repaired and a new fiber assembly is pulled from point A to B with a pre-terminated SC assembly. In the event that an SC is not used, blunt fiber is pulled and terminated with a fuse-on connector minimizing costs and time to restore the service outage. Plugged directly into the FieldShield YOURx-Terminal or YOURx-TAP, FieldShield D-ROP provides a complete protection pathway from the access point directly to the premise, business or antenna with the option for restoration after accidental fiber cut. D-ROP does not have the slack storage challenges that a flat drop presents because the duct slack can be peeled or removed leaving only the fiber assembly.

Features and Benefits


  • Compliant to Telcordia GR-3155
  • Available with singlemode fiber


  • Quick and easy to install 
  • FieldShield Direct Bury Microduct has high tensile strength and crush resistance that withstands all types of implementations including open trenching, vibratory plowing, micro-trenching and directional boring
  • Duct is constructed from HDPE to prevent degradation


  • Available terminated with SC or bulk
  • Includes bend-insensitive fiber
  • Pushes directly into a FieldShield YOURx-Terminal
  • Integrated tone wire simplifies ground locating in direct bury applications
  • Industry standard orange provides high visibility for direct bury applications


  • Available in bulk or pre-connectorized for a Labor Lite plug-and-play installation

Technical Specifications

 FieldShield D-ROP


Up to 300 foot coil (-0/+5%)

Outside Diameter

0.276" (7mm)

Inside Diameter

0.146" (3.7mm)


High Density

Connector Type


Operating Temperature

-40°F to 176°F (-40° to 80°C)

Duct Color

Orange or Black

Stringing Tension

To local regulations. Recommended not to exceed 0.2 KN

Min. Bend Radius

4.72" (120 mm)

Rated Cable Load

270 lbf (1.2 KN)

Tone Wire

Copper coated steel wire


Part number, lot number, footage markers every foot

Breakout Length

12 Inches